DAVID EDEN

Over a decade ago, we set the standard in bass amps with our WT800. Now we’re raising it significantly higher with our newest and most sophisticated integrated amp ever – the WT1205.

Dual 7025 preamp tubes drive two separate channels that can be used intdidually or blended for dual channel instruments (the Stick, e.g.). Each channel features Dynamic Bass and Treble boosters, a unique EQ center (4-band on Ch. 1, 3-band w/ sweepable mid on Ch.2), dual effects loops (pre and post) and variable compression. Using automix technology, the studio-quality DI (selectable pre- or post-EQ) always sends the active channel(s) to the console.

Dial in your sounds and then pump up to 2400 watts peak power (1200 watts RMS), enough to drive a variety of compatible multiple-speaker arrays. Execute changes on the fly with the included footswitch, including: Mute, channel switching, Master Gain Booster (the solo button) and Enhance bypass.

The WT1205 now offers the discriminating bassist more power, more versatility, more musicality than ever before. It also features our new back-lit logo. One test drive and you’ll be spoiled for life. And that’s not necessarily a bad thing.

SPECIFICATION:
Power 8Ω/4Ω/2Ω 2x500/600 RMS 4/2Ω Power Mono Bridge 1200/1000W RMS 4/8Ω Distortion <.05% Frequency Response 10Hz-20KHz ±2dB Headroom 3dB Dimensions 17"W X 3.5"H X 13"D Weight 26 LBS

EDEN D410XST

Our 1000 watt D410XST features a deeper,stronger low end than the XLT, and a more open, transparent midrange definition and exceptionally flat studio-like response along with reduced size and weight. The tone is wonderful, well-balanced with a smooth, effortless quality usually reserved for the studio. If you like high-definition and low distortion coupled with a big sound, this is well worth the auditioning. Massive internal bracing and optimum bracing make for extremely tight lows.

SPECIFICATION:
SPEAKERS EC-1060XS Cast Frame TWEETER E-2700 Cast Bell CROSSOVER 3.5kHz @18db POWER HANDLING 1000W RMS FREQ. RESPONSE 36hz - 14khz ±2dB SENSITIVITY 104dB SPL@1W1M IMPEDANCE 8Ω DIMENSIONS 23”w x 25”h x 18.5” WEIGHT 95 LBS

EDEN D115XLT

Our high-powered 400 watt 15" two-way system, featuring the fastest responding 15" speaker available, a classic bottom with great detail and transient response. The D115XLT features our new cast-frame EC-1500XL woofer with three inch high temperature voice coil and our E-2700 cast bell tweeter.

SPECIFICATION:
SPEAKERS EC-1500XL Cast Frame TWEETER E-2700 Cast Bell CROSSOVER 3.5KHz @ 18dB POWER HANDLING 400W RMS FREQ. RESPONSE 46hz - 14khz ±2dB SENSITIVITY 100dB SPL@1W1M IMPEDANCE 4Ω or 8Ω DIMENSIONS 23”w x 25.5”h x 18.5”d WEIGHT 59 LBS

EMG Pickups and electronics

Model P:
One of EMG’s original designs and our most popular bass pickup model since its introduction in 1979, the P covers a wide sonic palette of classic and modern bass sounds. Because the P utilizes ceramic magnets coupled with short, squat coils, the tone is endowed with high-end articulation, warmth, and incredible low end punch, all with less noise and more signal. Countless pros use it because they find it has a natural presence, powerful lows, punchy midrange, and superior definition. Great for all styles of music. This model is also available with ceramic steel magnets for a smoother high end EQ response.

40 & 45 DC:
The 40P design has two offset coils that result in more low end with brilliant highs. It is intended for 6-string models that have a more narrow string spacing and uses short, squat coils that have very little resistance and plenty of inductance. Ceramic magnets are used to add clarity. The 40P has a natural presence, powerful lows, punchy midrange, and superior definition. This pickup uses a 40 Extended housing that is 4 inches (102mm).

BQS System:
For EMG pickups only, this system features a pre-wired balance control (blend) and master volume with separate bass and treble pots along with the concentric mid-control (stacked). All the EQ controls and balance control feature center detents.

www.emgpickups.com/artists/artist/574



MUSIC MAN BONGO5

32.4 wide,41.cm thick , 121 cm long, 4.2 kg
Basswood
High gloss polyester
Scale Lenght: 43" (86.4cm)
Neck Radius: 11" (27.9 cm)
Headstock Size: Only 9-3/4" (24.8 cm) long
Frets: 24- high profile,wide
Neck width 1-3/4" (44.5 mm) at nut 2-13?16" (71.4mm) fret
Neck Wood: Select maole neck
Fingerboard: Fretted resewood -pau ferro with on without inlad fretlines
Fret Markers: Custom Half-Moons
Neck Finish: Opaque satin
Neck Colors: black satine, carbon
Tunning Machine: Sheller BM, with tapered string posts
Truss Rod; Adjustable- no component or string remowal
Nack Attachment: 5 bolts - perfect alignment with no schifting;Sc
neck joint allows smooth access to higher frets
Electronic: Graphite acrylic resin coated body cavity and aluminium control cover
Controls: bass Dual Pickup,4-band active preamp; bridge/neck pickup balance ,treble,hight-mind,low mind
Pickups: Dual Humbucking with Neodymium magnets

BASS - "KAMIECKI"

5 string guitar made as a special order by Polish luthier, Pawel Kamiecki. This model was designed with cooperation of both, the luthier and NOVY. Possible mass production in the future after some modification. SPECIFICATION:
Body: Monolith (made from one piece of wood)
Fretboard: Ebony
Pickups: active EMG
Bridge: Schaller
Tuners: Gotoh
Frets: 24 Jumbo Schaller, long scale
Neck: asymmetric
Color: steel-graphite mate, with delicate texture

BASS - "MALINEK" - RIP

WARNING: THIS GUITAR HAS BEEN STOLEN IN ISTANBUL (TURKEY) IN DECEMBER 2006. I WOULD REALLY APPRECIATE ANY INFO RLATED THIS GUITAR. I WILL HAVE A SPECIAL PRISE FOR ANYONE WHO WILL HELP TO TRACK THIS GUITAR DOWN.

5 string guitar made by Polish luthier Malinek in 1998 for a special order. The pattern for this guitar was taken from STAUSU guitar, later mass produced by Warwick. The shape and other parameters were modified according to my needs.
SPECIFICATION:
Body: Monolith (made from one piece of wood)
Fretboard: Ebony
Pickups: 2 active humbuckers
Bridge: Schaller
Tuners: Schaller
Frets: 24 Jumbo Schaller
Neck: asymmetric
Color: black with carbon texture finished by Pawel Kamiecki

BASS - "MALINEK"

4 string guitar made by the luthier family of Malinek. My first "serious" guitar in my life.
Shape based on one of the Hammer models.
SPECIFICATION:
Body: Pear Tree
Fretboard: Ebony
Pickups: 2 active EMG humbuckers
Bridge: Made by Malinek
Tuners: Schaller
Frets: 24 Jumbo Schaller
Neck: Ash with Palisander inserts
Color: black

MAYONES VICTORIUS 5 - CUSTOM BASS

Mayones Custom Basses vary in the shape of the body, but all feature the same common specs and customizing options. Each bass comes with a selection of 11 wood-tops, available in several transparent colors and natural wood, matt or gloss finish. All basses are available with 6 bridge options (Schaller or ABM, both also with piezo, strings-thru-body or NFS Fretted/Fretless) and many different electronic setups (Bartolini, Aguilar, Basslines, EMG, NOLL, LeFay). Possible with Rosewood or Ebony fingerboard. Models can be additionally outfitted with custom markers and inlays.